Brick Paver Installation & Edging



Staging of product

Most paver jobs will differ depending on access, website conditions, project size and of course, the weather. Cautious consideration ought to be taken to identify the time to begin the paver installation.

The foreman or task manager must always have the products (sand/ pavers) dispersed around the project website for easy and efficient installations. Paver pallets/bundles need to be put in a way not to disrupt the paver installation. The appropriate pallet/bundle placement can make the real project installation simpler and quicker by lowering the overall labor of managing the material.

Brick paver patterns

Pavers can be put in several patterns depending on their shape. Each paver shape will normally have several different hatch patterns that are supplied by the manufacturer.

The laying pattern and shape of the paver is extremely important to the performance of the application. Professionals have to take into account the traffic weight loads on their paver tasks. 90 or 45 degree herringbone patterns are recommended in all street and driveway applications, as these patterns will supply the optimum load support needed and will withstand creeping from the turning of tires and starting or braking of car traffic. In the majority of applications worldwide, it has actually been revealed that pavers laid in a herringbone pattern have performed effectively.

Pavers that are 60 mm (2 - 3/8 in) density appropriate for pedestrian applications. Pavers that are going to be used in commercial or commercial applications need to be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a number of conditions that identify the beginning point of a paver job.

When starting to set up pavers it is best to snap a real straight chalk line on the surface of the bedding sand or pull a true straight string line above the surface of the bed linen sand at the ended up elevation of the pavers This will assist as a guide for maintaining straight joint lines and will also enable the installer to make changes in the positioning of the pavers.

Structures and concrete curbing are typically not straight and must not be utilized for developing straight joint lines. The usage of string lines is necessary to determine the true straightness of the edge. As the paver installation progresses, the string lines will help reduce the need for little trim pieces.

Joint width in between pavers should be between 1/16 and 3/16 in (2 and 5 mm ). There are some pavers with spacer bars on their sides. These will maintain a minimum joint width and enable the bed linen and jointing sand to go into in between each paver. Pavers with spacer bars are usually not laid in snug versus each other since a string line will provide consistent joint spacing.

Installation of brick pavers.

One of the most commonly used methods for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along among the true straight lines that you have actually pulled or above the bedding sand. This will provide you a straight and real line off which to work. Once this row is established, you can continue to work outside into the field with the rest of the pavers. Constantly ensure to regularly examine your joint lines to make sure they are straight and real. If not, modifications to the pavers can be made as you continue setting up. Pavers should be installed hand tight. The best method is to place a paver against another one and let it slide down into the bedding sand. Do not kick or tap the pavers into location as this can throw your lines out of true straightness.

When setting up pavers on a high grade, they must be set up at the base of the grade going uphill. This will avoid the pavers from sneaking as they are being laid.

The best way for setting up pavers on big tasks is to install them mechanically. There are a couple products a professional ought to consider before installing pavers mechanically:

1.) Mechanical installers are just efficient in setting up pavers in specific patterns.

2.) The professional must make sure that the manufacturer can production and bundling pavers in the preferred pattern on the pallets for easy mechanical installation.

Poor color blending could result in a patchy looking installation. The majority of makers are constant with color blending on each bundle of pavers, however it is the professional's responsibility to ensure correct mixing in the field.

Cutting treatments for brick pavers.

Contractors typically have 2 ways of cutting pavers. When cutting pavers damp, it will assist reduce dust and will extend the diamond blades life. The operator of the brick saw should constantly cut the pavers away from the surface area of the paver field when cutting wet, due to the truth that the pavers will create a slurry that will stain the paver surface.

The brick saw operator ought to constantly wear the proper protection that is required for operating a saw, such as eye, ear, respiratory and hand protection ).

Edging types

Edge restraints play a significant role in the total success of an interlocking pavement installation Edging restraints remove lateral motion of the pavers and hold the pavers securely together. Specifically at the outer boundary of the paver application, without an edging restraint, your task is ensured to stop working over time.

There are several various edging restraints from which specialists can pick. Generally manufactured edge restraints are the most typically utilized by specialists. Manufactured edging restraints can range from, plastic edging, steel and aluminum, woods or precast concrete and stone. An edging type that is utilized mainly in industrial and industrial applications is poured-in-place concrete curbs. This edging restraint is usually set up by other contractors.

Edging installation.

This might result in the migration of the bed linen sand and ultimate lateral motion of the pavers. If there is a possibility of losing bed linen sand in between the pavers and the edge restraint, then geo textile fabric is suggested. When a space between the pavers and the edging goes beyond 3/8" (10mm), then the space must be filled with cut pavers.

Compaction of brick Tree Service Del Ray Beach pavers.

After installation, the pavers have to be compacted. The whole location that is to be compacted must be swept tidy of any foreign objects and debris that can trigger scratching or scuffing on the surface of the pavers.

In addition, it is essential that the very first compaction takes location before any jointing sand has been applied to the pavers. If jointing sand is used to the pavers before compaction takes place, this can trigger a bridging issue and will not allow the joints to be completely filled with jointing sand. This can also prevent the pavers from being correctly set into the bedding sand.

When condensing the pavers, it is suggested that you make a minimum of 2 passes in different directions across the pavers. This will permit the pavers to be effectively set in the bedding sand and will force the bed linen sand up into the joints from the bottom of the pavers.

The compaction of the pavers is really critical to the final performance of the pavers. Failure to do appropriate compaction can lead to contortions and pavement failure with time.


Paver pallets/bundles should be put in a way not to interfere with the paver installation. One of the most widely utilized approaches for the installation of pavers is hand installation of each paver. The operator of the brick saw ought to constantly cut the pavers away from the surface of the paver field when cutting damp, due to the truth that the pavers will develop a slurry that will stain the paver surface. Edging restraints eliminate lateral movement of the pavers and hold the pavers firmly together. When a space in between the pavers and the edging goes beyond 3/8" (10mm), then the space needs to be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *